
Epoxy flooring for a home in South Florida costs about US$4.75 to US$13.75 per square foot before tax in 2026, depending on the system you choose and the size and condition of the floor. A 600 sq ft Florida room, laundry or bonus room ranges from about US$2,565 for a solid color floor to about US$9,075 for a decorative metallic floor. This guide gives the real ranges from the Epoxy Boss Florida cost calculator for garages, indoor rooms, pool decks and patios, and explains what changes the price.
All figures are pre-tax estimates in US dollars (USD), taken from the Epoxy Boss Florida cost calculator in November 2026 for sound concrete with standard preparation. The final price is confirmed in a written quote after we see the slab.
Epoxy flooring cost by system (600 sq ft indoor room)
| System | 600 sq ft estimate | About per sq ft |
|---|---|---|
| Solid color | US$2,565 – 3,135 | US$4.75 |
| Full-broadcast flake | US$3,375 – 4,125 | US$6.25 |
| Polished concrete | US$4,725 – 5,775 | US$8.75 |
| Metallic epoxy | US$7,425 – 9,075 | US$13.75 |
Pre-tax, USD; excludes applicable Florida sales tax. Indoor residential space on sound concrete. Source: Epoxy Boss Florida cost calculator, November 2026.
Cost by space
| Space | System | Estimated range |
|---|---|---|
| 2-car garage (380–480 sq ft) | Flake | US$2,375 – 3,000 |
| 2-car garage | Solid color | US$1,805 – 2,280 |
| 3-car garage (600–780 sq ft) | Flake | US$3,300 – 4,290 |
| Pool deck or patio, 400 sq ft | Flake | US$2,520 – 3,080 |
| Pool deck or patio, 400 sq ft | Quartz | US$3,510 – 4,290 |
| Pool deck or patio, 800 sq ft | Flake | US$4,500 – 5,500 |
| Indoor, 1,200 sq ft | Flake | US$5,927 – 7,244 |
| Indoor, 1,200 sq ft | Metallic | US$12,392 – 15,146 |
Pre-tax, USD. Source: Epoxy Boss Florida cost calculator, November 2026.
For a deeper look at garages, including what repairs add, read our garage floor coating cost guide.
What each system gives you
- Solid color: a clean, even look and the lowest cost. Good for laundry rooms, storage and budget garages.
- Full-broadcast flake: our most popular home floor. Colored chips cover the whole base coat, hide dust and sand, and add light texture underfoot. See why flake floors are so popular.
- Quartz broadcast: colored quartz for strong slip resistance on pool decks, lanais and wet areas. For outdoor decks, also see our Flexdeck system.
- Polished concrete: no coating to wear through; the concrete itself is ground and densified. See how concrete is polished.
- Metallic epoxy: a hand-placed, marble-like finish for living areas, bars and showrooms. It takes several days, so small metallic floors carry a US$5,000 minimum on our calculator.
What changes the price
Size and minimum charges
Larger floors cost less per square foot because set-up, travel and equipment are shared over more area. Small floors reach a minimum project charge: US$1,750 for flake and solid garages on our calculator, and US$5,000 for metallic.
Concrete condition and moisture
Hairline cracks are included in standard preparation. Wider cracks, old paint or glue, oil stains and moisture are priced as extra preparation. Many South Florida slabs push moisture, so testing and a mitigation primer are common; see moisture and substrate systems.
Indoor or outdoor
Pool decks, patios and lanais face sun, heat and water, so they need UV-stable topcoats and a textured, slip-resistant finish.
Coves, steps and edges
Cove base, steps and landings add detail work and are priced by the linear foot. See epoxy floor coving explained.
See your floor before you decide
Not sure which color fits your space? Try our free floor visualizer: upload a photo of your garage or patio and see real Epoxy Boss flake, solid and metallic finishes on your own floor. Then run the same space through the cost calculator for a price range.
What a good quote includes
- The measured area and any coves, steps or thresholds.
- The preparation method, such as diamond grinding with dust control.
- Crack repair and moisture testing, listed clearly.
- Each coat in the system and the topcoat material.
- The schedule, return-to-use time and the warranty.
Taxes and currency
Our quotes are written in US dollars and every calculator figure is pre-tax. Applicable Florida sales tax is shown on your written quote.
Frequently asked questions
How much does epoxy flooring cost per square foot in South Florida?
For homes, about US$4.75 per sq ft for solid color, US$6.25 for flake, US$8.75 for polished concrete and US$13.75 for metallic on a 600 sq ft room, before tax.
How much does it cost to coat a pool deck?
On our calculator, a 400 sq ft pool deck or patio is US$2,520 to US$3,080 with flake and US$3,510 to US$4,290 with quartz, before tax.
Why is metallic epoxy more expensive?
Each metallic floor is hand-placed in several coats over several days, with more cure time and skilled labor than a flake or solid floor.
Is the online estimate my final price?
No. It is a starting point. The written quote follows an assessment of your concrete.
Get your written quote
Epoxy Boss Florida installs home floors across Miami-Dade, Broward and Palm Beach. Get an instant range on our cost calculator, see our residential flooring work, call (954) 288-2459, or book a free floor assessment for a written quote in US dollars.







